Skip links

How to Install Rolled Roofing?

Rolled roof is a practical and cost-effective approach to protect your home from the weather. This adaptable material provides durability and ease of installation, whether you're covering a shed, porch, or low-slope roof. But how to install rolled roofing? Only Roofing Contractor in Spring, Texas, recommends the utilization of large strips or sheets, making installation relatively simple for those with some DIY experience.

Before starting how to install rolled roofing, it is important to prepare the area or roofing sections. Check that it is clean, dry, and free of protrusions or defects. Before beginning, repair any existing problems and let the surface dry fully. Installing roofing felt or underlayment can add an extra layer of moisture protection and extend the life of your rolled roofing.

Cutting and Positioning

Using a utility knife, properly measure the area and cut the rolled roofing material to the desired length. Carefully unroll the cloth across the surface, making sure it is uniformly aligned and free of wrinkles or creases. To prevent water seepage and to form a watertight seal, overlap each consecutive row by a few inches.

Roofing Protection

Once the roofing is in place, nail it down around the borders and occasionally throughout the surface. For a secure grip, use roofing nails and a hammer to ensure they penetrate both the rolled roofing and the surface beneath. To tighten the seal and prevent moisture intrusion, apply roofing adhesive around the edges and overlaps.


You can effectively learn how to install rolled roofing because it offers solid protection for your structure against the weather if you carefully follow the instructions mentioned above. For a long-lasting and weather-resistant roof, contact our roof replacement Woodlands services for utmost safety and attention to detail during all sorts of roofing projects.