The regular need and maintenance for roof shingles repair is a basic necessity that tops your home by remarkably increasing its value in the list of residential properties. As long as the durability of the roofing process is guaranteed by the service providers, a safe and sound home remains a shelter against the strong hits of storms that safeguards everything, from walls to furniture and the inhabitants living inside.
For individuals with low to moderate household income, roofing restoration or its entire replacement can be a pricey proposition, increasing the requirement to keep a regular check and balance for roof shingles repair. Any sign of wear and tear on the roof or mere water stains on the ceilings or walls can seep through even the sandwich panel roof, and the extent of damage can be spread to unexpected sections, including the entire rooms and attics of your home. Whether these shingles came off roof, it is not a wise choice to ignore even the minor relevant signs that indicate timely demand for roof shingles repair.
What if Storms Blow the Shingles Away?
Whenever the storms have blown away the shingles of your roof, it would be a careless judgment to wait till the damage worsens, or else the rest of your home will become vulnerable to the invasion of foreign elements.
The general rule of thumb for how to replace blown off shingles relies on the fact that if the roof of your home is badly worn out and has exceeded its lifespan of at least fifteen or twenty years, it needs immediate replacement. However, if the roof is in overall good shape with the exceptions of a few mild damages, urgent repair would be sufficient to restore the architectural health of your properties.
Two Methods Which Shingles are Attached to the Roof
There are two methods through which shingles are attached to the roof in the first place:
1. Roofing Nails
Short shanks, sharp points, and wide flat heads enable the nails to penetrate the shingles without tearing them off.
2. Adhesive Strips
Some shingles are designed with adhesive strips underneath to ensure that they are fixed and adhered firmly to the waterproof seal or moisture barrier placed on the roof before the installation of shingles.
Here’s a pro tip!
Always plan to repair the roofs on a dry and mild to moderate warm day so the shingles will be more flexible yet less likely to crack.
The reasons behind shingles blown off include: Understanding the Factors
Discover the factors that contribute to shingles being blown off your roof. From severe weather conditions to improper installation and maintenance, various reasons can lead to shingle damage.
1. Faulty Installation
Faulty roof installations are primarily due to inappropriate hammering of the nails too high on the shingles instead of ensuring their penetration through the nailing strips, which makes them tear under adverse conditions.
2. Roof’s Lifespan
Typically, the average lifespan of a roof is considered to be fifteen to twenty years. Over time, as shingles remain exposed to foreign elements and if not furnished properly on time, they will tear off before their time and eventually blow right away after getting hit by a storm.
3. Insufficient Installation
When shingles with adhesive tapes are installed on your home roofs, they require four to six weeks on average to get fixed properly to the underlayment materials. If this needed time is not provided to the roof or, meanwhile, the ceilings are subject to heavy storms, rain, or snowfall, the chances of shingles being blown away will be increased.
4. Improper Roof Structure
If the underlying structure of the roof is not layered properly or is decaying, it will not be able to secure the shingles appropriately in their place, which exposes the elements, such as water and debris, to get overly accumulated. This can loosen the nail, and shingles become distorted.
Ways to Roof Shingles Repair
You can easily perform roof shingles repair if the roof of your home is relatively at a shallow pitch and requires a few basic repairs, such as gluing the curved corners of the shingles or replacing asphalt shingles.
1. Replacing Asphalt Shingles
As asphalt shingles are easily installed and are among the most cost-effective types, you need to repair and install full shingles. You’re lucky if you have any leftover shingles from the last time your roof was worked on by yourself or the builders, or else you’ll need to buy a new bundle. In case the perfect match isn’t available, choose the ones closest to the existing shingles of the roof.
2. Caulking Techniques
A caulk is a flexible material used to seal air leaks through cracks, gaps, hollow spaces, or joints less than one-quarter-inch wide between the stationary building components and materials. In case the corners of the shingles are rolled or curved inwards or upwards, which mostly happens when shingles are about to exceed their longevity, gluing them with caulk is the most effective choice for roof shingles repair.
3. Roofing Sealants
If you’ve noticed any cracked sections on the roof of your home, there’s no need to remove the entire shingles. The easiest way is to apply a uniform layer of roofing sealant on the cracked site. Now press the shingle down and similarly apply a second bead using a suitable tool such as a putty knife that evenly spreads the material. The best part about this method is its ability to camouflage that blends with the surrounding aesthetics of the shingles.
Conclusion
Roof shingles repair is a relatively easy process that homeowners can perform with little to no availability of assistance. Regular surveillance for home maintenance is a basic responsibility that homeowners shouldn’t neglect at any cost to ensure intact and undamaged roofing.
Also Check: Aluminum Siding Repair
