Skip links

How to Install Snow Bar on Metal Roof?

Metal roofs are popular due to their resilience and lifespan, particularly in areas with significant snowfall. P piled snow can slide off in big sheets without sufficient measures, causing damage or injury. This is where snow bars, or snow guards, come into play. But how to install snow bar on metal roof?

Installing a snow bar on your metal roof prevents snow from sliding off too rapidly or in large amounts, providing safety for your property and people nearby. Our roofing contractors Spring TX describe how to install snow bar on metal roof so you (homeowner) can have the basic notion of its appropriate installation and operation.

Choose the Right Snow Bar

There are three varieties of snow bars available

  • Pad-style snow guards
  • Pipe-style snow guards
  • Fence-style snow guard

Each variety is tailored to certain roof materials and snow load circumstances. Consult our suppliers to choose the best version of the snow barrier for your property’s roof.

Measure and Mark the Placement

Use a tape measure and a chalk line to measure and correctly mark the snow bar’s location on your roof. To achieve maximum performance, exact spacing and alignment are required.

Refer to the manufacturer’s standards or suggestions for the proper spacing between snow bars, often determined by roof slope and snow weight.

Prepare the Surface

Clear the area where the snow bar will be installed of any debris, dirt, or snow buildup. This will provide adequate adhesion and stability after the snow bar is installed. If required, thoroughly clean the surface with mild detergent and water.

Install the Snow Bar

Installation procedures may differ depending on the snow bar type used. Standard techniques include adhesive bonding, mechanical fastening, or mixing the two.

Follow our directions carefully to ensure appropriate alignment and spacing between the snow bars. Use a level to confirm the snow bar is evenly and firmly fitted.

Test for Stability

Once the snow bar is placed, do a stability test to confirm it can support the weight of snow and ice. Apply pressure to the snow bar to imitate snow load conditions, ensuring it stays securely in place without moving or detaching. If the snow bar passes the stability test, it is ready to prevent snow buildup and skidding.

The Bottom Line

Learning how to install snow bar on metal roof is a proactive step toward protecting your property and ensuring safety during inclement weather. Following these methods and suggestions, you may successfully install a snow bar while reducing the danger of snow-related damage or accidents. Remember to speak with our roof replacement Woodlands experts and suppliers for expert guidance and suggestions based on your roof and climate circumstances.