how to overlap metal roofing lengthwise

How to Overlap Metal Roofing Lengthwise

Overlapping metal roofing Lengthwise is essential for durability and weather resistance.. This quick instruction will explain how to overlap metal roofing lengthwise installation for a waterproof, long-lasting roof.

Metal roofing is popular owing to its resilience and lifespan. A good installation requires understanding how to overlap metal roofing lengthwise.

Things You Need To Overlap Metal Roofing

Before you get started, gather the following tools and materials:

1. Metal roofing panels

2. Screws

3. Screw gun or drill

4. Tape measure

5. Chalk line

6. Circular saw or tin snips

7. Safety glasses

8. Gloves

9. Ladder

10. Friend or helper (safety first!)

Steps for Overlapping Panels Lengthwise

Let us now go into the specifics of how to overlay metal roofing lengthwise:

  • Place the First Panel: Begin at the bottom border of the roof and align the first metal roofing panel with your chalk line. Check its square and level. Then overhang on the eave (the lowest border of the roof) should be equal on both sides.
  • Secure the First Panel: Attach the first panel to the roof deck using a screw gun or drill. Screw into the pre-drilled holes in the ridges of the metal panel. To achieve a solid fit, space them equally.
  • Duplicate the Second Panel: When positioning the second panel, ensure that it appropriately overlaps the first. For most metal roofing systems, a 1-inch overlap is suggested. Check that the second panel, like the first, lines with the chalk line.
  • Fasten the Second Panel: Use the same screws to secure the second panel as the first. Check that the panels are firmly linked, and there are no gaps.
  • Repeat the Procedure: Keep overlapping and fixing panels until you reach the end of your roof. It’s like assembling a massive, protected jigsaw puzzle!

Tips for a Successful Installation

  • Follow the manufacturer’s instructions for overlap and fastener spacing. 
  • Wear proper safety equipment, such as safety glasses and gloves.
  • To prevent harming the panels, take your time and work carefully.
  • To avoid mishaps on a steep roof, consider employing roof jacks or safety harnesses.


Overlapping metal roofing lengthwise may seem to be a difficult process, but with the correct equipment and a little patience, it’s totally doable. A properly installed metal roof may preserve your property for many years and possibly boost its value.

So, as you begin on your roofing journey, keep the following tips in mind: measure precisely, overlap appropriately, and fix securely. With these fundamentals in mind, your metal roof will not only protect your property but will also bring a contemporary touch of beauty to it.

Get in Touch

sidebar qoute